안드로이드 디버깅 WIFI_ADB

# 안드로이드 디버깅 WIFI_ADB #### 디바이스 확인 ```sh C:\〉adb devices -l List of devices attached ce0917192961113904 device ``` #### 디바이스 ip 확인 ```sh C:\〉adb shell 127|test:/ $ ifconfig .... wlan0 Link encap:UNSPEC inet addr: Bcast:10.10.10.255 Mask:255.255.255.0 inet6 addr: as80::dxd6:169f:1f18:3cc/64 Scope: Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:29867 errors:0 dropped:0 overruns:0 frame:0 TX packets:22913 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30915061 TX bytes:3773800 ... ``` #### WIFI 연결 포트 설정 (port : 1111) ```sh C:\〉adb tcpip 1111 restarting in TCP mode port: 1111 ``` #### 디버깅 연결 ```sh C:\〉adb connect :1111 connected to :1111 ``` #### USB모드로 전환 ```sh C:\〉adb -s :1111 usb ``` #### adb 옵션 확인 ```sh C:\〉adb Android Debug Bridge version 1.0.41 Version 29.0.6-6198805 Installed as C:\WEB_APP\Android Sdk\platform-tools\adb.exe global options: -a listen on all network interfaces, not just localhost -d use USB device (error if multiple devices connected) -e use TCP/IP device (error if multiple TCP/IP devices available) -s SERIAL use device with given serial (overrides $ANDROID_SERIAL) -t ID use device with given transport id -H name of adb server host [default=localhost] -P port of adb server [default=5037] -L SOCKET listen on given socket for adb server [default=tcp:localhost:5037] general commands: devices [-l] list connected devices (-l for long output) help show this help message version show version num networking: connect HOST[:PORT] connect to a device via TCP/IP disconnect [[HOST]:PORT] disconnect from given TCP/IP device, or all forward --list list all forward socket connections forward [--no-rebind] LOCAL REMOTE forward socket connection using: tcp: ( may be "tcp:0" to pick any open port) localabstract: localreserved: localfilesystem: dev: jdwp: (remote only) acceptfd: (listen only) forward --remove LOCAL remove specific forward socket connection forward --remove-all remove all forward socket connections ppp TTY [PARAMETER...] run PPP over USB reverse --list list all reverse socket connections from device reverse [--no-rebind] REMOTE LOCAL reverse socket connection using: tcp: ( may be "tcp:0" to pick any open port) localabstract: localreserved: localfilesystem: reverse --remove REMOTE remove specific reverse socket connection reverse --remove-all remove all reverse socket connections from device file transfer: push [--sync] LOCAL... REMOTE copy local files/directories to device --sync: only push files that are newer on the host than the device pull [-a] REMOTE... LOCAL copy files/dirs from device -a: preserve file timestamp and mode sync [all|data|odm|oem|product|system|system_ext|vendor] sync a local build from $ANDROID_PRODUCT_OUT to the device (default all) -l: list files that would be copied, but don't copy them shell: shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...] run remote shell command (interactive shell if no command given) -e: choose escape character, or "none"; default '~' -n: don't read from stdin -T: disable pty allocation -t: allocate a pty if on a tty (-tt: force pty allocation) -x: disable remote exit codes and stdout/stderr separation emu COMMAND run emulator console command app installation (see also `adb shell cmd package help`): install [-lrtsdg] [--instant] PACKAGE push a single package to the device and install it install-multiple [-lrtsdpg] [--instant] PACKAGE... push multiple APKs to the device for a single package and install them install-multi-package [-lrtsdpg] [--instant] PACKAGE... push one or more packages to the device and install them atomically -r: replace existing application -t: allow test packages -d: allow version code downgrade (debuggable packages only) -p: partial application install (install-multiple only) -g: grant all runtime permissions --abi ABI: override platform's default ABI --instant: cause the app to be installed as an ephemeral install app --no-streaming: always push APK to device and invoke Package Manager as separate steps --streaming: force streaming APK directly into Package Manager --fastdeploy: use fast deploy --no-fastdeploy: prevent use of fast deploy --force-agent: force update of deployment agent when using fast deploy --date-check-agent: update deployment agent when local version is newer and using fast deploy --version-check-agent: update deployment agent when local version has different version code and using fast deploy (See also `adb shell pm help` for more options.) uninstall [-k] PACKAGE remove this app package from the device '-k': keep the data and cache directories debugging: bugreport [PATH] write bugreport to given PATH [default=bugreport.zip]; if PATH is a directory, the bug report is saved in that directory. devices that don't support zipped bug reports output to stdout. jdwp list pids of processes hosting a JDWP transport logcat show device log (logcat --help for more) security: disable-verity disable dm-verity checking on userdebug builds enable-verity re-enable dm-verity checking on userdebug builds keygen FILE generate adb public/private key; private key stored in FILE, scripting: wait-for[-TRANSPORT]-STATE wait for device to be in the given state STATE: device, recovery, rescue, sideload, bootloader, or disconnect TRANSPORT: usb, local, or any [default=any] get-state print offline | bootloader | device get-serialno print get-devpath print remount [-R] remount partitions read-write. if a reboot is required, -R will will automatically reboot the device. reboot [bootloader|recovery|sideload|sideload-auto-reboot] reboot the device; defaults to booting system image but supports bootloader and recovery too. sideload reboots into recovery and automatically starts sideload mode, sideload-auto-reboot is the same but reboots after sideloading. sideload OTAPACKAGE sideload the given full OTA package root restart adbd with root permissions unroot restart adbd without root permissions usb restart adbd listening on USB tcpip PORT restart adbd listening on TCP on PORT internal debugging: start-server ensure that there is a server running kill-server kill the server if it is running reconnect kick connection from host side to force reconnect reconnect device kick connection from device side to force reconnect reconnect offline reset offline/unauthorized devices to force reconnect environment variables: $ADB_TRACE comma-separated list of debug info to log: all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp $ADB_VENDOR_KEYS colon-separated list of keys (files or directories) $ANDROID_SERIAL serial number to connect to (see -s) $ANDROID_LOG_TAGS tags to be used by logcat (see logcat --help) $ADB_LOCAL_TRANSPORT_MAX_PORT max emulator scan port (default 5585, 16 emus) ```